Primer Overhaul Kit

Restoring Primer Pump Operation
The kit is replaces the worn O-rings (2) on the primer pump used on non-fuel injected engine installations. Often times the primer seals are not re-lubricated until someone complains "the primer isn’t working" or "the engine is hard starting." This is most evident by the pump being hard or stiff to operate.
Generally speaking, by the time the pump stops performing, the seals are worn (to the point that lube is of little value) and must be replaced. The kit contains the two O-rings, a packet of Seal Lube, and detailed instructions. 

Part Number:

ADS-POP   

Approval Basis:

N/A

Replaces:

Aircraft Eligibility:

Beech 19 Series, Beech 23 Series, Cessna 120, Cessna 140, Cessna 150, Cessna 152, Cessna 170, Cessna 172, Cessna 175, Cessna 177, Cessna 180, Cessna 182, Cessna 185, Cessna 190, Cessna 195, Cessna 205, Cessna 206, Cessna 207, Cessna 210, Cessna 336, Cessna 337, M20 Series, PA-24, PA-28, PA-28R, PA-44

Typical Lead Time:

Stock

Finish:

Specifications:

Notes: